Volume 1, Issue 1 (Vol.1,No.1,Fall & Winter 2016)                   JWSTI 2016, 1(1): 13-23 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Sabzi M, Moeni far S, Najafi Birgani E. Investigation on Effect of Heat Input on the Corrosion Behavior of Hadfield Steel Weld Joints in SMAW Process. JWSTI. 2016; 1 (1) :13-23
URL: http://jwsti.iut.ac.ir/article-1-23-en.html

Abstract:   (2646 Views)

In this investigation, the effect of heat input of SMAW process on the corrosion behavior of Hadfield steel weld joints was investigated. For this purpose, 4 annealed sheets with thickness 25 mm prepared from Hadfield steel and then welding applied by SMAW process with 6.75 and 11.25 kJ/mm heat input values. For corrosion behavior evaluation of base metal and weld metal areas, potentiodynamic polarization and electrochemical impedance spectroscopy methods were used in the 3.5% NaCl solution. The result of corrosion tests indicated that by increasing the heat input in the SMAW process, the corrosion resistance in the weld metal were reduced. It was also found that in both heat input values, base metal had more corrosion resistance compared to weld metal.

Keywords: Hadfield steel, corrosion behavior, weld joints, heat input, SMAW process.
* Email:mas.metallurg88@gmail.com
Type of Study: Research | Subject: Special

Add your comments about this article : Your username or Email:
Write the security code in the box

© 2015 All Rights Reserved | Journal of Welding Science and Technology of Iran

Designed & Developed by : Yektaweb

تحت نظارت وف بومی آسپا-وف