Volume 2, Issue 2 (Journal OF Welding Science and Technology of Iran 2016)                   JWSTI 2016, 2(2): 2-14 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Ghasemi Tabasi H, Kokabi A H. Evaluation of microstructure and mechanical properties of 410NiMo as an overlay layer on low alloy steel. JWSTI 2016; 2 (2) :2-14
URL: http://jwsti.iut.ac.ir/article-1-93-en.html
Evaluation of microstructure and mechanical properties of 410NiMo as an overlay layer on low alloy steel
H. Ghasemi Tabasi * 1, A. H. Kokabi
1- , hgt2006@gmail.com
Abstract:   (11553 Views)

The aim of this study is to reach an increased service life for parts using in sour environment by weld overlaying process. In this investigation, two successive layers of ER410NiMo were clad on low alloy steel substrates. To reduce the likelihood of Hydrogen Induced Cracking (HIC) and producing stable hydrogen traps, Post Weld Heat Treatment (PWHT) was conducted. Microstructural analysis, X-ray diffraction studies, and mechanical tests show significant increase for austenite volume fraction after second stage of PWHT. In fact, not only two-stage PWHT  reduce the samples hardness, but it also increases austenite volume fraction which is a more resistant microstructure against hydrogen cracking.

Keywords: Weld overlaying, Hydrogen sulfide, Hydrogen embrittlement, Martensitic stainless steel, Temper
Full-Text [PDF 179 kb]   (1193 Downloads)    
Type of Study: Research | Subject: Special
Add your comments about this article : Your username or Email:
CAPTCHA
Send email to the article author

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2024 CC BY-NC 4.0 | Journal of Welding Science and Technology of Iran

Designed & Developed by : Yektaweb