Volume 10, Issue 1 (Journal OF Welding Science and Technology 2024)                   JWSTI 2024, 10(1): 15-30 | Back to browse issues page


XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Nazari A R, Taherizadeh A, Atapour M. Investigating microstructure and mechanical properties of dissimilar resistance spot welding of AISI 430 to S500 MC. JWSTI 2024; 10 (1) :15-30
URL: http://jwsti.iut.ac.ir/article-1-454-en.html
1- Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111, Iran.
2- Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111, Iran. , a.taheri@iut.ac.ir
Abstract:   (793 Views)
In this study, the microstructure and mechanical properties of dissimilar resistance spot welding of AISI 430 steel and S500 MC steel were investigated. To carry out this research, Taguchi's L9 array was used to determine the number of samples and determine the range of variables of each sample, and after welding the samples and performing the shear tensile test, the sample with the highest tensile shear strength (13740 N) and the highest amount of fracture energy (102160 Joules), was considered as the best example; Also, the variables of this sample, i.e., welding current of 12 kW, welding time of 12 cycles, and electrode force of 3 kN, had the highest signal-to-noise values, and these values were chosen among the best range of variables among the proposed variables. Then, a microhardness test was performed on the welded sample with the above variables, and microstructural studies were performed by optical microscope and scanning electron microscope. The hardness of the weld zone was observed to be about 400 Vickers, and the microstructure of the weld metal consisted of ferrite, martensite, and Widmannstatten ferrite.
Full-Text [PDF 7179 kb]   (236 Downloads)    
Type of Study: Research | Subject: Special

Add your comments about this article : Your username or Email:
CAPTCHA

Send email to the article author


Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2024 CC BY-NC 4.0 | Journal of Welding Science and Technology of Iran

Designed & Developed by : Yektaweb