Volume 2, Issue 2 (Journal OF Welding Science and Technology of Iran 2016)                   JWSTI 2016, 2(2): 27-37 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Mohammadi Zahrani M, Shamanian M. Effect of heat treatment on the grain structure and mechanical properties of Al-7075 friction stir weld. JWSTI 2016; 2 (2) :27-37
URL: http://jwsti.iut.ac.ir/article-1-95-en.html
1- , mohsen.mohammadi@ma.iut.ac.ir
Abstract:   (8452 Views)

The fine grain structure of friction-stir welded aluminum alloys is unstable during post weld heat treatment and some grains abnormally grown. In this study, the sequence of abnormal grain growth during T6 heat treatment of Al-7075 friction-stir weld and its effect on mechanical properties of the weld was studied. The results showed that heat treatment in 510 ˚C resulted in drastic grain growth in stir zone and fine equiaxed grains in the stir zone of as-welded joint were substituted by millimeter-scale irregular grains. Post weld heat treatment resulted in decrease in the tensile elongation from about 10% to 1.5% although the joint tensile strength improved by 28%. In addition, post weld heat treatment changed the fracture location from the 
heat-affected zone to the stir zone.

Full-Text [PDF 177 kb]   (993 Downloads)    
Type of Study: Research | Subject: Special

Add your comments about this article : Your username or Email:

Send email to the article author

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2024 CC BY-NC 4.0 | Journal of Welding Science and Technology of Iran

Designed & Developed by : Yektaweb