Volume 2, Issue 1 (Journal OF Welding Science and Technology of Iran 2016)                   JWSTI 2016, 2(1): 49-56 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Sadeghi Gogheri M, Shabani M, Mirzapour E, Kasiri M, Amini K. Friction stir welding of dissimilar joint of aluminum alloy 5083 and commercially pure titanium . JWSTI 2016; 2 (1) :49-56
URL: http://jwsti.iut.ac.ir/article-1-75-en.html
Friction stir welding of dissimilar joint of aluminum alloy 5083 and commercially pure titanium
M. Sadeghi Gogheri * 1, M. Shabani , E. Mirzapour , M. Kasiri , K. Amini
1- , msg8789@gmail.com
Abstract:   (12316 Views)

In this study, commercially pure titanium and aluminum alloy 5083 in connection rotational speed of 1120 rpm and a feed rate of 50 mm per minute for butt welding by friction stir welding has been successfully completed. Micro-structure, hardness and tensile test was conducted on the connection. Welding area is a composite of aluminum and titanium particles that the particles plays an important role in increasing hardness and tensile strength. Welding area is also has three areas. Vickers hardness is 480 times the area of welding means that the hardness in the area of the base metal of titanium and aluminum increased by 16% and 60% for titanium aluminum intermetallic compounds is created in the area is weld.

Keywords: Aluminum 5083, commercially pure titanium, friction stir welding, microstructure, mechanical properties.
Full-Text [PDF 3404 kb]   (1564 Downloads)    
Type of Study: Research | Subject: Special
Add your comments about this article : Your username or Email:
CAPTCHA
Send email to the article author

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2024 CC BY-NC 4.0 | Journal of Welding Science and Technology of Iran

Designed & Developed by : Yektaweb