Journal of Welding Science and Technology of Iran
نشریه علوم و فناوری جوشکاری ایران
JWSTI
Engineering & Technology
http://jwsti.iut.ac.ir
1
admin
2476-583X
2676-6787
fa
jalali
1398
6
1
gregorian
2019
9
1
5
1
online
1
fulltext
other
بهینه نمودن مقدار عنصر آلیاژی نیکل در ترکیب شیمیایی فلزجوش راسب شده از الکترود E7018-G
Optimization of Ni content in the deposited weld metal composition of E7018-G electrode
تخصصي
Special
پژوهشي
Research
در پژوهش حاضر، تاثیر عنصر آلیاژی نیکل بر خصوصیات فلزجوش راسب شده از الکترود E7018-G مورد ارزیابی و پژوهش واقع شد. بدین منظور الکترودهایی حاوی مقادیر مختلف نیکل (0-1.7wt.%) طراحی و ساخته و توسط فرآیند جوشکاری قوس دستی (SMAW) جوشکاری شدند. مطالعات ساختاری حاکی از تاثیر دوگانه نیکل بر ریزساختار فلزجوش حاصله بود. توضیح آنکه با افزایش نیکل تا 1.2wt.% جز فریت سوزنی در ریزساختار فلزجوش افزایش و دانه¬بندی منطقه مجددا گرم شده از فلزجوش ظریفتر گردید. اما مقادیر زیاد نیکل (>1.2wt.%) موجب افزایش اجزائی از قبیل فریت ویدمن-اشتاتن در ساختار فلزجوش می¬شد. برای ارزیابی تاثیر نیکل بر خصوصیات مکانیکی فلزجوش از پارامتر حاصلضرب استحکام کششی در انرژی ضربه (UTS×CVN) استفاده شد. بررسی¬های خواص مکانیکی نشان داد که بیشترین مقدار پارامتر مذکور در فلزجوش حاوی 1.2wt.% نیکل حاصل می¬شود. افزایش سختی فلزجوش با افزایش مقدار نیکل، مرتبط با تشکیل ریز اجزائی در ریزساختار فلزجوش و افزایش آنها با زیاد شدن مقدار نیکل بود.
In the present study, effect of Ni alloying element on the characteristics of deposited weld metal of E7018-G electrode was evaluated. Therefore, electrodes contained different amounts of Ni (0-1.7wt.%) were designed, manufactured and welded via SMAW process. Microstructural studies revealed dichotomy effect of Ni on the deposited weld metal microstructure, i.e. increasing the Ni content up to 1.2wt.% improved the formation of acicular ferrite in the weld metal microstructure and caused significant grain refinement at the reheated zone of weld metal. While, higher Ni content (>1.2wt.%) resulted in some raising in the widmannstatten ferrite content in the weld metal. Strength multiplied by impact energy parameter (UTS×CVN) was used for mechanical properties assessment. Mechanical properties evaluation revealed the highest UTS×CVN parameter achieved in the weld metal contained 1.2wt.% Ni. Hardness of the weld metal increased with increasing Ni content which is related to the formation of micro constituents in the microstructure of weld metal and increasing their content with increasing Ni content.
E7018-G, ریزساختار, فریت, ضربه, استحکام
E7018-G, microstructure, ferrite, impact, strength
63
75
http://jwsti.iut.ac.ir/browse.php?a_code=A-10-84-4&slc_lang=other&sid=1
M.
Toghraei Semiromi
میلاد
طغرائی سمیرمی
10031947532846001531
10031947532846001531
No
دانشکده مهندسی معدن و متالورژی، دانشگاه یزد، یزد، ایران.
M.
Mosallaee PourYazdi
مسعود
مصلایی پور یزدی
10031947532846001532
10031947532846001532
Yes
دانشکده مهندسی معدن و متالورژی، دانشگاه یزد، یزد، ایران.
M.
Kalantar
مهدی
کلانتر
10031947532846001533
10031947532846001533
No
دانشکده مهندسی معدن و متالورژی، دانشگاه یزد، یزد، ایران.
A.
Seifoddini
امیر
سیف الدینی
10031947532846001534
10031947532846001534
No
دانشکده مهندسی معدن و متالورژی، دانشگاه یزد، یزد، ایران.