Volume 6, Issue 2 (Journal OF Welding Science and Technology 2020)                   JWSTI 2020, 6(2): 53-63 | Back to browse issues page

XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Safari M, Deilami Azodi H. Experimental study of formability of friction stir welded ultra-thin sheets of IF steel. JWSTI 2020; 6 (2) :53-63
URL: http://jwsti.iut.ac.ir/article-1-328-en.html
1- Department of Mechanical Engineering, Arak University of Technology, Arak, Iran
Abstract:   (2930 Views)
In this paper, the experimental investigation of formability of friction stir welded ultra-thin sheets of IF steel is investigated experimentally. First, the sheets are joined by friction stir welding process based on the tests determined according to the Taguchi design of experiments. The investigated parameters in the welding process are as tool rotational and traverse speeds. Then, the tailor welded blanks are formed based on dome height test up to the defect stage and the dome height is measured for each test. Therefore, the effects of friction stir welding process parameters on formability of friction stir welded ultra-thin sheets of IF steel are evaluated. The results show that by increasing the rotational speed, the dome height in forming process decreases, while with increasing the traverse speed, the formability of tailor welded blanks by friction stir welding process improves.  Also, the results of optimization based on signal to noise ratio method show that the tool rotational speed has the greatest effect on the dome height of tailor welded blank. 
 
Full-Text [PDF 937 kb]   (897 Downloads)    

Add your comments about this article : Your username or Email:
CAPTCHA

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2024 CC BY-NC 4.0 | Journal of Welding Science and Technology of Iran

Designed & Developed by : Yektaweb