Volume 3, Issue 2 (Journal OF Welding Science and Technology of Iran 2018)
JWSTI 2018, 3(2): 79-89 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Yousefieh M, Tamizifar M, Boutorabi S, Borhani E. Optimization of FSW parameters for mechanical properties of Nano/UFG Aluminum- scandium alloys by using design of experiment method
. JWSTI 2018; 3 (2) :79-89
URL: http://jwsti.iut.ac.ir/article-1-163-en.html
URL: http://jwsti.iut.ac.ir/article-1-163-en.html
1- School of Metallurgy and Materials Engineering, Iran University of Science and Technology (IUST), 16846-13114, Narmak, Tehran, Iran
2- Department of Metallurgy and Materials Engineering, Semnan University, Iran
2- Department of Metallurgy and Materials Engineering, Semnan University, Iran
Abstract: (7010 Views)
In the present research, the parameters of FSW process were optimized for the mechanical properties of thin aluminum- scandium alloys by a design of experiment (DOE) technique. The optimum conditions providing the highest mechanical properties were found by this method. Among the three factors and three levels tested, it was concluded that the tool rotational speed had the most significant effect on the mechanical properties and the travel speed had the next most significant effect. The effect of tool tilt angle was less important when compared to the other factors. The EBSD results demonstrated a recrystallized equi axial structure and the existence of a mixture of B and Ccomponents in the weld nugget.
Keywords: Friction stir welding, Al-Sc alloys, Mechanical properties, Microstructure, Design of experiment, Texture.
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
