Volume 4, Issue 1 (Journal OF Welding Science and Technology of Iran 2017)                   JWSTI 2017, 4(1): 10-20 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Sadeghi B, Sharifi H, Rafiei M. Evaluation of dissimilar joint properties of A321 austenitic stainless steel to A537CL1 carbon steel by GTAW process. JWSTI. 2017; 4 (1) :10-20
URL: http://jwsti.iut.ac.ir/article-1-137-en.html

Abstract:   (697 Views)
In this research, the microstructure and mechanical behavior of dissimilar joint of AISI 321 stainless steel to ASTM A57CL1 were studied. For this purpose, the GTAW process and ER 308L filler metal with diameter of 1.8 mm were used. In order to study the microstructure and fracture surface of weld samples, optical microscope and scanning electron microscope (SEM) were used. Also, the mechanical behavior of the joint was examined by impact, tension and microhardness tests. It was found that the microstructure of weld metal was austenite with skeletal ferrite. Also in some areas the lacy ferrite was seen. All samples were fractured from ASTM A537CL1 steel with a ductile manner during the tension test. The weld metal indicated high impact energy about 205 J. 
Type of Study: Research | Subject: Special

Add your comments about this article : Your username or Email:
Write the security code in the box

© 2015 All Rights Reserved | Journal of Welding Science and Technology of Iran

Designed & Developed by : Yektaweb

تحت نظارت وف بومی آسپا-وف