@ARTICLE{Rasouli, author = {Rasouli, I. and Rafiei, M. and }, title = {Evaluation of dissimilar joint properties of AISI316 to AISI430 stainless steels produced by GTAW}, volume = {4}, number = {2}, abstract ={In this research, microstructure and mechanical properties of AISI316 to AISI430 dissimilar joint were investigated. For this purpose, GTAW process using ER316L and ER2209 filler metals with diameter of 2.4 mm was used. The microstructure and fracture surface of the welded samples were characterized by optical microscopy and scanning electron microscopy. Also the mechanical properties of the welded samples were evaluated by tension, impact and microhardness tests. It was found that the microstructure of the welded sample with ER316L filler metal contained Widmanstatten austenite with inter-dendritic and lathy ferrites. Also, in the welded sample with ER2209 filler metal, Austenite phase in ferrite matrix was seen. In tension test, all samples were fractured from AISI430 side of the joint in a ductile manner. ER2209 weld metal indicated low impact energy of about 27 J, while ER316L weld metal indicated higher impact energy of about 43 J. The fracture surface in both welded samples indicated brittle fracture mode. The microhardness of the weld metal of the welded sample with ER316L filler metal was higher than the welded sample with ER2209 filler metal due to the presence of alloying elements, proper distribution of delta ferrite and finer microstructure. }, URL = {http://jwsti.iut.ac.ir/article-1-230-en.html}, eprint = {http://jwsti.iut.ac.ir/article-1-230-en.pdf}, journal = {Journal of Welding Science and Technology of Iran}, doi = {}, year = {2019} }