Ganjeh E, Kaflou A, Shirvani K. Study of microstructure, phase transformation and high temperature strength of hastelloy X and Ni3Al joint by TLP process. JWSTI 2024; 9 (2) :115-128
URL:
http://jwsti.iut.ac.ir/article-1-447-en.html
1- Department of Advanced Materials and Renewable Energies, Iranian Research Organization for Science and Technology.
2- Department of Advanced Materials and Renewable Energies, Iranian Research Organization for Science and Technology. , ali.kaflou@irost.ir
Abstract: (1480 Views)
In this study, mechanical properties of the transient liquid phase (TLP) bonds between Hastelloy X to Ni3Al IMC at temperature range of 800 - 900 °C were investigated. The microstructure of the joints was examined by optical and scanning electron microscopy. Also, high temperature XRD (HTXRD) analysis was utilized to investigate the phase changes at different temperatures of half-joints. According to microscopic observations, the joint cross-section consisted of three regions including diffusion affected zone (DAZ), isothermal solidification zone (ISZ), and Athermal solidification zone (ASZ), which increasing temperature and time result in ISZ consisting of nickel-rich solid solution developed across the microstructure. The optimum joint bonding strength was achieved for the sample treated at 1100 °C – 180 min equal to 355 ± 4.5 MPa. The ultimate tensile strength reached 36.5 ± 1 and 20.5 ± 1 MPa at temperatures of 800 °C and 900 °C, respectively. Fracture occurred on the side of the IMC substrates at both test temperatures due to the presence of shrinkage porosity during the solidification stage of IMC and crystal lattice parameters mismatch with the matrix.
Type of Study:
Research |
Subject:
Special